What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 02.07.2025 00:35
This one hit behind the barn.
a photo is worth a thousand words.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
At least they know the answer if they wanted it.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
This device then solves the entire problem.
There are three different concepts here that are getting confused.
There are two important concepts here.
(Dc diagram shown, AC is similar).
Oilers-Panthers tale of the tape: Who has the edge in Cup Final rematch? - theScore.com
so, what happens?
These devices are installed between the “hot” and “neutral” and protective ground.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
How can Ukraine and Russia resolve their conflicts?
eight
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
He then describes the function of a fuse.
Why do people stop working towards achieving their dreams?
The bolt then partially travels down the line to your home.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Scoop: Treasury officials defend "revenge tax" from wary GOP senators - Axios
An AC voltage/ current source, and an ac inductive load.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
2024–10–16 [ OO OLAOYE OYEBODE ]
New Research Reveals That the Universe Could End Way Sooner Than We Thought - SciTechDaily
First Sentence:
Here is a simplified AC power diagram.
Edit 2024–10.
But… the neutral is now “floating” because of the 1 ohm resistance.
nine
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Can you explain the difference between “mi piace” and “mi piacciono” in Italian?
The MOV will conduct when the voltage exceeds 50% of line voltage.
What is lightning?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Because the load is inductive, the current lags the voltage.(by a bit).
So, the voltage could go up to 500 volts, and the fuse will not open up.
This is where the MOV conducts again, and dissipated the energy.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
A circuit breaker is similar, but is resettable.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
One is “what exactly is in a ‘surge protector’ ? ”
I post the exact comment here.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
One
It also is a device that limits the change in current flow.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
For this case there are devices called Metal oxide varistors (MOV).
Upvotes:
what exactly is a ‘surge’ protector?
But it can get overloaded, and no longer works.
It seems Mohan does not understand the difference between a comment and an Answer.
Barnstars:
Can the fuse protect the electronic devices from lightning instead of a surge protector.
2024–10–14 [Omar Gharbi Omar Gharbi ]
but I think this circuit , shows a few more pieces.
2024–10–10[John johnson John Johnson ]
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
The third is lightning and “how it gets conducted into a home.”
the problem then depends on "how fast does the fuse operate?".
[image of Common-mode choke]
In schematic diagrams this is the symbol for a fuse:
[old diagram got deleted by accident]
What does a fuse do?
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This is 'the assistant's answer'
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
He then describes Rainy Season and Lightning.
At one ohm, the resistor has a maximum of 1 watt power.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
He then asserts :
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
These are simplified answers to the original question, and does not change anything I wrote above.
This is where this question deviates from being a 'generic' question, and becomes more specific.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Now when you have a certain ac resistance, then a current flows in a loop.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
A fuse is a non-resetable over current circuit protector.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
but this device (an Inductor) … impedes the rapid changes in the current.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
The other is “what does a “fuse” do?”